水平油水两相流测井仪器测量通道内流型识别
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金项目(50674070, 60374041);国家高技术研究发展计划(863)项目(2007AA06Z231)


Flow pattern identification in measuring channel of horizontal oilwater two phase flow well logging tool
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    水平井产出剖面测井中集流型仪器内油水两相流流型通常呈复杂多态性,正确认识流型演化规律有助于井下流量测量精度提高.在油水两相流流动环路中采集电导及电容传感器波动信号的基础上,基于非线性时间序列递归图纹理分析方法,对集流型仪器内油水两相流流型特征进行了表征.研究发现:在不同流量及含水率下,递归图纹理特征与流型之间具有较好的对应关系,可通过递归图纹理特征有效识别水平油水两相流流型.

    Abstract:

    The flow patterns of oilwater two phase flow in concentrating type tool of production profile logging of horizontal well usually present complex polymorphism, and understanding the flow pattern transition is very useful for improving the precision of flow measurement underground. The oilwater two phase flow pattern in concentrating type tool was characterized by using the nonlinear time series recurrence plots based on impedance and capacitance signals acquired from the flow loop test. The research shows that in different flow rate and water cut, there is a corresponding relation between recurrence plot texture feature and flow pattern, which could be used in identifying the flow pattern of horizontal oilwater two phase flow.

    参考文献
    相似文献
    引证文献
引用本文

金宁德,李爽,张煜,郑希科,谢荣华,刘兴斌.水平油水两相流测井仪器测量通道内流型识别[J].动力学与控制学报,2009,7(3):283~288; Jin Ningde, Li Shuang, Zhang Yu, Zheng Xike, Xie Ronghua, Liu Xingbin. Flow pattern identification in measuring channel of horizontal oilwater two phase flow well logging tool[J]. Journal of Dynamics and Control,2009,7(3):283-288.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2008-07-28
  • 最后修改日期:2008-12-28
  • 录用日期:
  • 在线发布日期:
  • 出版日期:

微信公众号二维码

手机版网站二维码