基于滑模控制的3D刚体摆姿态稳定性
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金(11072038)和北京市自然科学基金重点项目B类(KZ201110772039)资助


Attitude stabilibztion of 3D rigid pendulum with sliding mode control
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究3D刚体摆姿态稳定性的滑模控制问题.3D刚体摆由一个刚体绕一固定且无摩擦的支点旋转,刚体受到恒重力作用且具有三个转动自由度.针对3D刚体摆平衡位置处的姿态稳定控制问题,设计了滑模控制器并分析了角速度和姿态的渐进稳定性.由Lyapunov直接法找出了各个滑模系数取值的充分条件,并通过数值仿真实验验证了滑模控制方法的有效性.

    Abstract:

    This paper studied the attitude stabilization of a 3D rigid pendulum with sliding mode control method. The 3D rigid pendulum consists of a rigid body supported by a fixed and frictionless pivot with three rotational degrees, acted on by a constant gravitational force. Considering the attitude control of the 3D rigid pendulum at equilibrium position, this paper has designed a sliding mode controller and analyzed the asymptotic stability of angle velocity and attitude. Then the sufficient conditions of the sliding parameters were gained according to the Lyapunov direct method, and numerical simulation results show the validity of the controller.

    参考文献
    相似文献
    引证文献
引用本文

邹奎,戈新生.基于滑模控制的3D刚体摆姿态稳定性[J].动力学与控制学报,2013,11(2):178~181; Zou Kui,Ge Xinsheng. Attitude stabilibztion of 3D rigid pendulum with sliding mode control[J]. Journal of Dynamics and Control,2013,11(2):178-181.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2012-06-16
  • 最后修改日期:2012-07-11
  • 录用日期:
  • 在线发布日期: 2013-05-29
  • 出版日期:

微信公众号二维码

手机版网站二维码